Foundation drilling / BD18-Y
BD18-Y Reverse-circulation Hammer
Foundation drilling · matched hammer and bit
A supplier-catalog hammer series for foundation drilling. Select the bit, shank, connection and air supply together. Refer to the original parameter sheet for dimensions and operating limits; confirm the current specification before purchase.
- Model / family
- BD18-Y
- Hammer outside diameter
- 450 mm
- Recommended hole range
- 480–600 mm
Technical data is listed below. The complete catalog is available when discussing your requirements.
Inquire about this product ↗PRODUCT DATA
Request the complete catalog ↗Technical specifications
Extracted from the supplier catalog · PDF page 16
| Length, excluding bit | 2020 mm |
|---|---|
| Weight, excluding bit | 1836.6 kg |
| Hammer outside diameter | 450 mm |
| Compatible bit shank | BD18-Y |
| Recommended hole range | 480–600 mm |
| Connection | Customized to requirements |
| Working air pressure | 15–35 bar |
| Impact frequency, reference | 20.0 Hz @ 24 bar |
| Recommended rotary speed | 15–25 rpm |
Reference air consumption
| Air pressure | Air consumption (m³/min) |
|---|---|
| 1.7 MPa | 54.0 |
| 2.4 MPa | 77.0 |
| 3.0 MPa | 105.0 |
Catalog data is for selection reference. Confirm current specifications, connection, air supply and ground conditions with the supplier before ordering.
